D2Pro 9 Wire Update v1.1b May 12
The D2Pro Team has released a new beta 9 Wire Firmware for the DMS/D2A/D2B/D2C drive chips.
Note this does not fix the new “Un-Moddable” D2C Wiis.
Beta firmware for DVD updatability, legacy drive support and more! - 2008.05.12
v1.1b of the 9-wire d2pro firmware has been added to the resources section. See the readme file for the full list of cool features, but please keep in mind that this is a BETA release!
Download:
9-wire Firmware Updates
v1.1b - BETA - use at your own risk!
Windows XP - (driver also required — do not let Windows automatically search for a driver for d2prog!)
============================
d2pro v1.1b update - 9 wires
============================This software is provided as-is, with no warranties of any kind.
If you use this software, you do so at your own risk!=======
WARNING
=======** THIS IS A BETA UPDATE ** USE AT YOUR OWN RISK **
*** Do not update installed chips with diode shorted! ***
The diode prevents current from d2prog from flowing to the d2c chip.
If the diode has been shorted the d2c chip may be permanently damaged.There is no need to short the diode. If shorting the diode “solved” any problems
you are most likely using too long and/or too thin wires for 3v3 and GND.Thank you for using d2pro!
========
Features
========- Works with DMS, D2A, D2B and D2C* chipset drives
- Enables DVD update of the SPI Flash
- Updatable and configurable via utility disc
- Recovery Mode - can fully recover from a bad flash
- Region Fallback - impossible to brick the drive by setting the wrong region
* This firmware does NOT support the newly-discovered d2c chipsets
Discuss this topic in our forums.
